Lighting System Injection Molding

Lighting System Injection Molding is generally composed of base and lamp housing, different car series have different configurations, the main parts of the front and rear lights are: left and right lenses. Left and right decorative frame. Left and right lamp housing. Left and right reflector, etc. The appearance of automotive lights requires high, several important parts are transparent parts, electroplated parts, etc. The material of the base is usually thermosetting material - BMC, the lamp housing can be processed from PMMA, PP, ABS and other materials, usually two-color or three-color. It can be said that the most demanding parts of the car appearance is the lights, so the mold design and manufacturing requirements are extremely high.

The quality of automotive lighting is very important to the safety of driving, so we use materials with European light transmission, and can be resistant to high temperature corrosion materials, the design of lamps and lanterns not only to meet the requirements of safety regulations, but also to meet the requirements of beauty and practicality, combined with the different car series, the appearance of the car to the entire appearance of the car into one, beautiful and practical, in line with the requirements of aerodynamics. In order to meet this requirement, we also introduced two-color injection molding in Lighting System Injection Molding. This offers meaningful savings potential and new design possibilities for product manufacturing. Multi-color injection molding also places new demands on injection equipment. In terms of injection units, parallel and co-directional, parallel and opposite, horizontal and vertical L-shape and Y-shape co-directional single cylinder injection structures are available. As far as mixing nozzles are concerned, special nozzles such as pattern, wave, flow mark, gradient and interlayer can be selected. As far as the clamping mold is concerned, standard type, vertical turntable type, horizontal turntable type, pivot type and robotic rotation type mechanisms can be selected.

One of the key factors of multi-color injection molding is the versatility of computer-controlled programs. This is because even for the same type of multi-color product, if different mold designs are used, they must be paired with different electronic control programs.

.

http://www.gcstamping.com/